Detailed Product Description

•  

  1)250 MHz IBM PowerPC Processor (350 Mips)

  2)Linux Operating System

  3)1 x Smartcard-Reader

  4)MPEG2 Hardware decoding

  5)100Mbit full duplex Ethernet Interface

  6)2 LED status

  7)unlimited channel lists for TV/Radio

  8)channel-change time < 1 second

  9)full automatic service scan

  10)supports directly bouquet-lists (indirect unlimited)

  11)supports EPG (electronic program guide)

  13)fully adaptable OSD in many languages (skin-support)

  14)SPDI/F Interface for digital bit stream out (AC-3 / DTS)

  15)1 x Scart-interfaces (fully controlled by software)

  Technical Specification:

  DBC-Tuner:

  Frequency Range 5 to 858 MHz

  Input Impedance 75 Ohm

  Input Symbol rate 1to 6.9 Mbaud/s

  Video decoder:

  Video Compression MPEG-2 and MPEG-1 compatible

  Video Standard PAL G/ 25 Hz

  Video Formats 4:3 / 16:9

  Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)

  Letterbox precolating for 4:3 TV-Device

  Audio decoder:

  Audiokompression MPEG-1 & MPEG-2 Layer I and II

  Audio Mode Dual (main/sub), Stereo

  Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

  Output analog:

  Output Level L/R 0,5 Vss on 600 Ohm

  THD > 60 dB (1 kHz)

  Crosstalk < -65 dB

  Output digital:

  Output Level 0,5 Vss on 75 Ohm

  Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz

  S/PDIF-Output optical (AC3)

  Video parameter:

  Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm

  Teletext filter in conformity with ETS 300 472 Standard

  TV-Scart:

  Output: FBAS,RGB,S-VHS over OSD selectable

  Serielle Interface RS 232:

  Typ RS232 bidirectional

  Bit rate 115,2 kBit/s max.

  Plug Connector SUB-D-9

  Function Update of Firmware and Preprogramming

  Ethernet:

  100 MBit compatible, bi-direktional interface

  Function Update of Firmware and Preprogramming

  LNB Power and polarisation:

  LNB Current 500mA max. ; short-circuit-proof

  LNB Voltage vertical < 14V without load, > 11,5V at 400mA

  LNB Voltage horizontal < 20V without load, > 17,3V at 400mA

  LNB shut-off at Standby-Mode

  Count of active satellite position:

  DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION

  DiSEqC - Rotor Control

  Power consumption:

  < 10W / 12V

  Input voltage:

  DC12V,alternating acurrent +/- 15%

  Extern power supply:

  Input:

  110-240V AC / 50-60Hz / 0,6A

  Output:

  12V = / 1A

  Others:

  Ambient Temperature 15 to 35 centigrade

  Humidity < 80%

Contact person: Brenna Zhou

cellphone: 0086-13510263985